The Mold That Wasn't

A homeowner received an alarming mold test report and a five-figure remediation quote. ADR reviewed the data and found the test methodology was flawed. No remediation was needed.

A homeowner called us after an air quality test "failed." The lab report had numbers that looked alarming. What the test actually showed was a Thursday afternoon in a Southern California home. The correct response was not remediation.

All identifying details have been removed. The competitor company is not named.

The setup

A homeowner received a mold air quality test from another company. The report listed spore counts by genus and a summary indicating the results exceeded acceptable thresholds. The homeowner was quoted remediation work based on those results.

Before proceeding, they wanted a second opinion. They called ADR.

ADR's first step was to review the test report before visiting the home. The report tells you what was measured, what comparison method was used, and whether the interpretation holds up. A report is data. An interpretation is a decision someone made about that data. Those are different things.

What ADR was looking at: spore counts listed by genus, a total count, and the reference threshold the testing company had used to declare the result a "failure." The homeowner's assumption was that the mold problem was confirmed and they were shopping for the best price on remediation. ADR's starting question was different: does the data actually support that conclusion?

What the test actually showed

Air sampling captures spores present in the air at the moment of collection. It is a snapshot, not a baseline. Mold spores exist in every indoor environment and in every outdoor environment. Their presence at some concentration is normal.

The standard methodology for interpreting air samples compares indoor spore counts to an outdoor control sample collected the same day, at the same property. The outdoor sample establishes what's naturally present in the ambient environment for that geography, that season, and that day. Without it, any indoor number floats without context.

The competitor's report compared indoor counts to a published reference threshold rather than a concurrent outdoor control sample. The indoor reading exceeded that reference. But the reference didn't account for the outdoor baseline on the day of testing.

When ADR reviewed the report, the spore genera and counts were consistent with normal-range residential variation for the Inland Empire during that season. The dominant genus detected was Cladosporium, which is ubiquitous in Southern California outdoor air and is routinely the dominant genus found in homes with normal ventilation. The indoor count was actually lower than what a same-day outdoor sample would typically show.

The reading looked elevated because it was compared to the wrong baseline.

What we did

ADR visited the home and conducted a full visual inspection: looking for visible mold growth, moisture intrusion sources, HVAC condition, and any water damage history.

Moisture readings were taken at the locations identified in the original report as problem areas. All readings came back in the normal range.

ADR collected independent air samples with an outdoor control sample taken on the same visit. The results showed indoor-to-outdoor ratios consistent with a home without a mold problem. The spore types and counts matched what you'd expect from normal air exchange in the Inland Empire.

Conclusion: the test results did not support a mold finding. The remediation the homeowner had been quoted was not indicated by the data.

The call

ADR called the homeowner before sending any invoice for remediation work.

The conversation was straightforward. Based on our inspection and air samples, we don't see evidence of a mold problem requiring remediation. The test you received used a comparison method that we believe produced a misleading result. We would recommend you not proceed with the remediation that was quoted.

No remediation work was sold. The homeowner was not charged for a job ADR declined to perform. The call took about ten minutes. It saved the homeowner a five-figure estimate.

The followup

The homeowner asked ADR to put the findings in writing. ADR provided the visual inspection results, the moisture readings, the air sample data with outdoor control comparison, and a written explanation of why the findings did not indicate remediation.

The homeowner shared the report with their physician and their insurer. Neither found grounds to recommend further intervention.

The mold that was "found" didn't require treatment. The remediation the homeowner had been quoted was not performed. Six months later, the homeowner called ADR back for an unrelated water damage event. No mold issues had developed in the interim.

The frame

An air quality test is only as useful as the methodology behind it and the interpretation applied to the result. A spore count without a concurrent outdoor comparison is a number, not a finding.

The company that performed the original test operated within a structure where a positive finding generates a remediation sale. A test that doesn't find a problem doesn't generate revenue. That's not an accusation about intent. It's a description of how the category creates incentives.

ADR's interest in this case was aligned with the homeowner, not with a sale. The correct call was to say no. Saying no when it's the right answer is the job. It's the part of the job that most companies in this category have structured out of their business model.

The test said "failed." The house was fine.